Dry Ice Blasting Mold in WILMINGTON, California

Cryogenic mold removal that kills spores without water or chemicals

Dry Ice Blasting Mold in WILMINGTON, California is the fastest way to strip mold off framing, sheathing and crawl space joists without soaking your structure. We blast with -109°F dry ice pellets that lift spores, then vacuum them into HEPA filtration. If you have seen black mold growth or smelled that musty odor after a leak, call (833) 929-5837 and we will scope it today.

A powerful image of molten metal pouring in a heavy industry steel mill setting.

What Dry Ice Blasting Mold in WILMINGTON, California Actually Does

Dry Ice Blasting Mold in WILMINGTON, California is a cryogenic remediation method that fires soft dry ice pellets at roughly 300 m/s to freeze mold, lift it from the substrate, and sublimate on contact. Because the pellets turn straight from solid to gas, there is no secondary water damage, no sanding dust, and no chemical residue left behind. We use it on framing, subfloor, roof sheathing, and block walls where wet media blasting would ruin the material.

Homeowners across WILMINGTON call us when a slow supply-line leak, a failed water heater, or a foggy crawl space has let mold colonize for weeks. Coastal humidity off the harbor keeps indoor relative humidity above 60% for much of the year, which is exactly the range where mold spores in air start settling and colonizing. If you have been searching for dry ice mold remediation near me WILMINGTON, we run containment, blast, and HEPA-scrub the same day.

Why Choose Cryogenic Mold Removal in WILMINGTON

Why Choose Cryogenic Mold Removal in WILMINGTON

Dry ice blasting beats wire brushing, sanding, and wet chemical washing on almost every measure that matters in a mold job: speed, mess, and how much of your structure survives intact.

No Water, No Secondary Damage

Traditional washing pushes moisture into drywall and insulation you are trying to save. Dry ice sublimates on impact, so the substrate stays dry. That means no dehumidifier running for three extra days and no risk of a fresh mold bloom two weeks after we leave. On a typical 400 sq ft attic, we finish blasting in four to six hours.

Reaches Hidden Mold Behind Walls

We use a boroscope inspection camera to confirm growth inside wall cavities before we open anything. Once confirmed, dry ice blasting mold removal WILMINGTON crews can clean the back of sheathing and the sides of studs without full demolition. You keep more of the original framing and spend less on rebuild.

Kills Spores, Not Just Surface Stain

The thermal shock of -109°F pellets fractures mold cell walls on contact, and the kinetic energy lifts the residue into our negative air machine. We follow with an antimicrobial solution such as Concrobium or Benefect on porous surfaces. Post-blast air sampling typically shows spore counts back inside normal outdoor ranges within 24 hours.

Faster Turnaround, Lower Rebuild Cost

Because dry ice leaves no moisture and no abrasive media to clean up, we often move straight from blasting to encapsulant coating in the same visit. A 1,200 sq ft crawl space that would take three days with wire brushing and chemical wash is usually done in one long day, which cuts your labor bill and gets you back into the space sooner.

Our Dry Ice Blasting Mold Process in WILMINGTON

Every job follows the same five steps, whether it is a 60 sq ft bathroom wall or a 2,000 sq ft commercial crawl space. Here is exactly what happens from the first phone call to the final clearance test.

1

Inspection and Scope

We arrive with a moisture meter, thermal imaging camera, and boroscope to map where the mold actually is. You get a written scope the same day, usually within two hours of our arrival. If the source is an active leak, we flag it so your plumber or roofer can fix it before we blast.

2

Containment Setup

We build a containment barrier with 6-mil poly and zipper doors, then install a negative air machine with HEPA filters so spores cannot migrate into living space. Setup takes 45 to 90 minutes depending on the size of the affected area. Every technician wears PPE coveralls and respirator cartridges.

3

Dry Ice Blasting

Our technician feeds dry ice pellets through a blasting machine at 100 to 150 PSI and works the surface in overlapping passes. A typical attic takes three to five hours. The mold lifts, the pellets sublimate, and the HEPA vacuum captures the debris in real time.

4

Antimicrobial and Encapsulation

Once the surface is clean and dry, we apply an antimicrobial solution from Fiberlock or RMR-86 to any remaining porous material. Framing and sheathing then get an encapsulant coating that seals the wood grain. This step takes one to two hours and is what stops recurring mold after cleaning.

5

Clearance Testing

We run an air scrubber for a minimum of four hours, then take post remediation mold testing samples. Lab results come back in 24 to 48 hours. If spore counts are still elevated, we re-blast the affected area at no additional charge.

Trained, Certified, and Equipped for Cryogenic Blasting

Our technicians hold IICRC WRT and IICRC AMRT credentials, and our lead inspectors carry ACAC CMI and ACAC CMR certifications. We follow California Department of Public Health guidelines for mold assessment and remediation, and every job is performed under our California Contractors State License Board registration. We also hold OSHA 10 and EPA Lead-Safe certifications, which matters on pre-1978 homes common in the older WILMINGTON neighborhoods. Dry ice blasting is a specialty method, and we have invested in the equipment and training to do it correctly rather than treating it as an add-on to standard remediation.

  • IICRC WRT and AMRT certified technicians on every dry ice blasting mold job
  • ACAC CMI and CMR certified inspectors for scope and clearance testing
  • California Department of Public Health guidelines followed on every project
  • EPA Lead-Safe certified for pre-1978 housing stock common in WILMINGTON
  • OSHA 10 trained crews and full PPE on every containment entry
Trained, Certified, and Equipped for Cryogenic Blasting

Why WILMINGTON Homeowners Pick Our Dry Ice Blasting Mold Team

We are a local mold remediation company that specializes in cryogenic blasting, not a general contractor who rents the equipment once a year. That focus shows up in the scope, the schedule, and the final test results.

Same-Day Response Available

Call before noon and we can usually have an inspector on site the same day. For emergency situations like a burst pipe that soaked a wall overnight, we offer 24 hour mold removal dispatch. You get a real person on the phone, not a call center, and a firm arrival window.

Written Scope Before Work Starts

You see the full scope, the price, and the timeline before we open a single containment barrier. No surprise line items after the fact. We price dry ice blasting mold removal WILMINGTON jobs by square footage of affected area, not by the hour, so the number does not move.

Clearance Testing Included

Every dry ice mold remediation WILMINGTON project ends with post remediation mold testing and a lab report. If the numbers do not clear, we re-clean at no charge. That is the standard, not an upsell, and it is why our customers can hand the report to a landlord, buyer, or insurance adjuster.

Insurance Documentation Ready

We document every job with photos, moisture readings, and an Xactimate-formatted estimate that most carriers accept directly. If you are filing a water damage mold claim, that paperwork saves you days of back-and-forth. We can also bill the carrier directly on approved claims.

What Our Dry Ice Blasting Mold Service Includes

Every dry ice blasting mold job in WILMINGTON includes the full scope from inspection through clearance testing. We do not piece it out or charge extra for containment or documentation. Here is what is covered on a standard project.

What's Included

Full Inspection and Written Scope

Moisture meter, thermal imaging camera, and boroscope inspection to map the affected area. You get a written scope with square footage, method, and fixed price the same day. This is the document your insurance carrier will want to see.

Containment and Negative Air

6-mil poly containment barrier with zipper doors, plus a negative air machine running HEPA filters for the duration of the job. This keeps spores out of the rest of your home. Setup and teardown are included in the quoted price.

Dry Ice Blasting of Affected Surfaces

Cryogenic blasting at -109°F on framing, sheathing, subfloor, block, and concrete. We work in overlapping passes until the surface is visibly clean. Media cost and machine time are built into the fixed price, not billed hourly.

Antimicrobial and Encapsulation

Application of an antimicrobial solution such as Concrobium or Benefect to porous surfaces, followed by an encapsulant coating on framing and sheathing. This is the step that prevents recurring mold after cleaning. Both products are included.

HEPA Vacuuming and Air Scrubbing

Real-time HEPA vacuuming during blasting, then a minimum four-hour air scrubber run before clearance sampling. We also wipe down adjacent surfaces inside the containment. This step is what makes the clearance test pass.

Post Remediation Mold Testing

Air and surface samples sent to an accredited lab, with results back in 24 to 48 hours. You get a written clearance report you can share with a landlord, buyer, or adjuster. If the numbers do not clear, we re-clean at no charge.

Mold Problems We Solve With Dry Ice Blasting in WILMINGTON

Most mold calls come down to one of a handful of root causes. Here are the ones we see most often in WILMINGTON homes and commercial spaces, and how cryogenic blasting solves them.

Problem

Black mold growth on attic roof sheathing

Spores drop into living space through the HVAC system and can trigger allergies, asthma, and persistent musty odors throughout the house. Left alone, the mold eats into the wood and weakens the roof structure.

Solution

We contain the attic, blast the sheathing and rafters with dry ice, apply antimicrobial, and encapsulate the wood. Most attic jobs finish in one day and clear on the first post-test. You get before and after photos with the report.

Problem

Crawl space mold from chronic ground moisture

Crawl space mold climbs into the subfloor and floor joists, causing soft spots, sagging floors, and that damp smell that never goes away. It also feeds the HVAC system every time the air handler runs.

Solution

We blast the joists, subfloor, and block walls, then install a vapor barrier to stop moisture from wicking back up. A dehumidifier recommendation follows if humidity stays above 55%. Most crawl spaces are done in a single long day.

Problem

Hidden mold behind walls after a slow leak

By the time you see a stain on the drywall, the mold has usually been growing inside the cavity for weeks. Surface cleaning does nothing for the growth on the back of the sheathing and the sides of the studs.

Solution

We use a boroscope inspection camera to confirm growth before opening anything, then blast the cavity once it is exposed. Because dry ice adds no water, we can close the wall the same week. You keep the original framing.

Problem

Recurring mold after a previous cleaning

If the moisture source was never fixed or the surface was not fully cleaned, mold comes back within weeks. Each cycle weakens the material and costs you another remediation bill.

Solution

We find the source first, then blast, treat, and encapsulate. Encapsulant coating seals the wood grain so spores cannot re-establish on the same surface. We verify with post remediation mold testing and document the result.

Problem

HVAC mold contamination spreading spores

A contaminated air handler or duct run distributes spores to every room in the building. Cleaning the visible mold without addressing the HVAC just means it comes back on the next cooling cycle.

Solution

We inspect the air handler and ductwork with a boroscope, then blast accessible components and fog the plenum with antimicrobial. Duct cleaning is coordinated separately if needed. Clearance testing confirms the air is clean.

When to Call for Dry Ice Blasting Mold in WILMINGTON

1

A supply line under the kitchen sink has been dripping for weeks and the cabinet base is covered in black mold.

Solution:

We contain the cabinet area, remove the damaged base panel, and blast the framing and subfloor behind it. Antimicrobial and encapsulant go on the same visit, and we coordinate with your plumber on the source fix.

Outcome:

Cabinet base rebuilt within a week, no mold recurrence at the 90-day check, and a clearance report for your file.

2

A rental property in Southbridge has a crawl space full of mold and the tenant is complaining about a musty smell.

Solution:

We schedule the work around the tenant's hours, contain the access hatch, blast the joists and subfloor, and install a vapor barrier. The tenant does not need to move out during the job.

Outcome:

Odor gone within 48 hours of the air scrubber run, clearance test passed, and the property manager has documentation for the file.

3

A commercial warehouse near the Riverfront had a roof leak that soaked insulation and framing over a 2,000 sq ft area.

Solution:

We work after hours to avoid disrupting operations, contain the affected bays, blast the steel and wood framing, and fog the plenum. Xactimate estimate is prepared for the carrier.

Outcome:

Job completed over two nights, business open as usual each morning, and the insurance claim approved without a supplement.

4

A homeowner in Wawaset Park found mold behind bathroom tile after a slow shower pan leak.

Solution:

We boroscope the wall cavity to confirm growth, open a small access panel, and blast the framing and sheathing. Tile and fixtures go back on after clearance testing.

Outcome:

Wall closed within two weeks, no tile replacement needed beyond the access panel, and post-test cleared on the first pass.

5

An attic in North Brandywine has visible mold on the roof sheathing after a humid summer and poor ventilation.

Solution:

We blast the sheathing and rafters, apply antimicrobial, encapsulate the wood, and recommend additional ventilation to prevent recurrence. Most attic jobs finish in a single day.

Outcome:

Sheathing looks like new lumber, musty odor gone, and the homeowner has a clearance report for the next home inspection.

Tools and Methods We Use for Dry Ice Blasting Mold

Tools & Equipment

Dry ice blasting machine

Fires food-grade CO2 pellets at 100 to 150 PSI to freeze and lift mold from framing, sheathing, and block. The pellets sublimate on contact, leaving no media to clean up.

Negative air machine with HEPA filters

Maintains negative pressure inside containment so spores cannot migrate into living space. Runs for the full duration of the job and through the air scrubber phase.

Boroscope inspection camera

Lets us see inside wall cavities and ductwork without opening them up. We confirm hidden mold growth before recommending any demolition.

Thermal imaging camera

Reveals temperature differences that point to hidden moisture, which is where mold is most likely to be growing. Used during the initial inspection and again before clearance.

Moisture meter

Reads moisture content in wood and drywall to confirm whether the structure is dry enough to encapsulate. Readings are logged before and after the job.

Air scrubber and dehumidifier

Scrubs the air inside containment and pulls residual humidity out of the space. We run a minimum four-hour scrub before taking clearance samples.

Fogger

Applies a fine antimicrobial mist to complex surfaces like HVAC plenums and truss bays that hand wiping cannot reach. Often paired with dry ice blasting on the same visit.

Methods

IICRC S520 mold remediation standard

The industry standard for mold assessment and remediation, covering containment, removal, and clearance. Every dry ice blasting mold job we run follows S520 conditions and documentation requirements. It is the framework your insurance carrier expects to see.

ACAC CMI and CMR inspection protocol

Our certified inspectors use the ACAC protocol for moisture mapping, sampling, and scope writing. That means the scope you get is defensible if you need to file a claim or disclose the work during a sale.

California Department of Public Health guidelines

CDPH guidelines shape how we sample, how we interpret results, and how we document clearance. We follow them on every job, residential or commercial, across WILMINGTON.

EPA Lead-Safe work practices

Pre-1978 homes in older WILMINGTON neighborhoods may have lead paint under the surface. Our EPA Lead-Safe certification means we handle those surfaces without creating a second hazard during remediation.

Xactimate estimating

We write estimates in Xactimate format so most insurance carriers can process them directly. That saves you days of back-and-forth and reduces the chance of a supplement request mid-job.

How Dry Ice Blasting Mold Runs in WILMINGTON

WILMINGTON sits on the harbor with marine air pushing humidity inland most of the year, and indoor relative humidity above 60% for weeks at a time is normal. That is the range where mold spores in air settle and colonize, especially in crawl spaces, attics, and any wall cavity with a slow leak. The city's older housing stock, much of it built before 1978, means we frequently work around lead paint and knob-and-tube era framing, which is one reason we keep EPA Lead-Safe certification current. Dry ice blasting remediation WILMINGTON California jobs also run into block foundation walls in neighborhoods like Hedgeville and Browntown, where mold grows in the mortar joints and resists wire brushing. We blast the block, treat with antimicrobial, and follow with a vapor barrier. If you have been searching for dry ice blasting for mold on framing WILMINGTON, we handle that scope weekly. Most jobs are scheduled within 48 hours of the inspection, and same-day dry ice blasting mold WILMINGTON California scheduling is available when you call before noon.

Service Areas

Riverfront

Newer construction with tight building envelopes, which means small leaks stay hidden longer. We use thermal imaging to find moisture before it becomes visible mold.

Hedgeville

Older block foundation homes where mold grows in mortar joints. Dry ice blasting cleans block without driving water into the wall.

Trolley Square

Historic housing stock with plaster walls and original framing. We boroscope before opening anything so we preserve as much original material as possible.

Southbridge

Rental-heavy area with frequent tenant turnover. We schedule around tenant hours and provide clearance reports for property managers.

North Brandywine

Attic mold is common here due to ventilation issues in older roof assemblies. Most attic jobs finish in a single day.

Local Considerations

Year-round marine humidity off the harbor

Indoor relative humidity stays above 60% for much of the year, which is the threshold where mold colonizes. We recommend dehumidifiers and vapor barriers on most crawl space jobs to keep it from coming back.

Pre-1978 housing stock across older neighborhoods

Lead paint under the surface means we follow EPA Lead-Safe practices during any demolition. Our certification lets us handle those surfaces without creating a second hazard.

Block foundation walls in older sections of the city

Mold grows into mortar joints and resists wire brushing. Dry ice blasting cleans block and mortar without adding moisture, and encapsulant seals the surface afterward.

Humid summers followed by wet winters

Two moisture seasons per year means two windows for mold growth. We schedule most crawl space and attic work in spring and fall to stay ahead of both.

Attic Sheathing Restored in Trolley Square

Before

A 700 sq ft attic had visible black mold across roughly 60% of the roof sheathing after a slow roof leak went unnoticed for two months. Moisture meter readings on the rafters were above 24% and the space smelled strongly musty.

After

We contained the attic, blasted the sheathing and rafters over five hours, applied antimicrobial, and encapsulated the wood. Post-testing 48 hours later showed spore counts back inside normal outdoor ranges. The homeowner kept the original sheathing.

Maintenance & Follow-up

Fix the roof leak source, add ridge and soffit ventilation, and check attic humidity each spring. A small dehumidifier during humid months keeps readings under 55%.

Before

A 1,100 sq ft crawl space had mold across the joists and subfloor from chronic ground moisture. The tenant had been complaining about a musty smell for months and the property manager had already paid for one failed surface cleaning.

After

We blasted the joists, subfloor, and block walls in one long day, applied antimicrobial, and installed a 6-mil vapor barrier. The musty odor was gone within 48 hours of the air scrubber run and clearance testing passed on the first try.

Maintenance & Follow-up

Keep the vapor barrier intact, run a crawl space dehumidifier during humid months, and inspect after any heavy rain. Annual moisture checks catch small issues before they become mold.

Before

A slow shower pan leak had soaked the wall cavity behind the tile for several weeks. Visible mold was showing at the baseboard and the homeowner was told by another contractor that the entire wall would need to be torn out and rebuilt.

After

We boroscoped the cavity, opened a small access panel, and blasted the framing and sheathing. The original studs came out clean and intact, and only the access panel needed new drywall. Clearance testing passed on the first pass.

Maintenance & Follow-up

Re-caulk the shower pan annually, run the exhaust fan for 20 minutes after every shower, and check the baseboard for soft spots each season.

Dry Ice Blasting Mold Pricing in WILMINGTON

Typical 2026 pricing for dry ice blasting mold in WILMINGTON, California runs $1,800 to $6,500 for residential jobs, with commercial scopes priced separately. The dry ice media itself costs more than chemical wash, but you save on rebuild because we remove less material and there is no dry-out time. We quote by square footage of affected area, not by the hour, so the number does not move once work starts. Every quote includes containment, blasting, antimicrobial, encapsulation, and clearance testing.

Pricing Factors

Square footage affected

The single biggest driver. A 60 sq ft bathroom wall lands near the low end of the range, while a 1,500 sq ft crawl space runs toward the top. We measure during the inspection and quote the exact area.

Access and containment complexity

A finished attic with a narrow hatch takes longer to contain than an open crawl space. Tight spaces add labor hours for setup and teardown, which shows up in the quote. We flag access issues during the inspection so there are no surprises.

Material being blasted

Framing, sheathing, and block all blast cleanly and quickly. Soft insulation board has to be removed and replaced instead, which adds disposal and material cost. We identify material types in the scope.

Hidden growth found during work

If we open a wall and find more mold than the boroscope showed, we document it with photos and adjust the scope before continuing. You approve any change before we proceed. This is rare but it happens on older homes.

Encapsulation and vapor barrier needs

Crawl spaces almost always need a vapor barrier to prevent recurrence, which adds material and labor. Attics usually need encapsulant only. Both are itemized in the quote so you can see what you are paying for.

Insurance claim vs. out of pocket

If you are filing a water damage mold claim, we prepare an Xactimate estimate and can bill the carrier directly on approved claims. Out-of-pocket jobs are quoted the same way but paid at completion.

Investment Range

$1,800 - $6,500 for most residential jobs in 2026

Based on project scope

Value You Get

Dry ice blasting costs more per square foot than chemical wash, but it saves material you would otherwise have to replace and eliminates the dry-out days. On a typical attic or crawl space, the rebuild savings usually cover the media premium.

Frequently Asked Questions About Dry Ice Blasting Mold

Have questions? We have answers.

Call Us
How much does dry ice blasting mold cost in WILMINGTON California?

Most residential jobs in WILMINGTON run $1,800 to $6,500 in 2026, depending on square footage and access. A single attic or bathroom wall typically lands near the low end, while a full crawl space with encapsulation runs higher. Dry ice media itself costs more than chemical wash, but you save on rebuild because we remove less material. We give you a fixed written price before we start.

Is dry ice blasting safe for mold removal in WILMINGTON?

Yes. The pellets are food-grade CO2, the same gas that puts the fizz in soda, and they sublimate completely with no residue. We still build containment and run a negative air machine because the mold spores themselves are the hazard, not the dry ice. Technicians wear PPE coveralls and respirator cartridges, and we ventilate the work area before anyone re-enters.

Does dry ice blasting damage wood in WILMINGTON California?

No. Dry ice blasting is non-abrasive, so it will not gouge framing, pit sheathing, or round off edges the way sandblasting or soda blasting can. It is safe on dimensional lumber, plywood, OSB, brick, and concrete block. The one material we avoid is soft insulation board, which we remove and replace instead. On a typical WILMINGTON attic, the original 2x4 rafters come out clean and intact.

How effective is dry ice blasting for mold in WILMINGTON?

It removes visible mold and surface spores more completely than wire brushing, and it reaches into wood grain where hand scrubbing cannot. In our experience, post-blast air samples clear to normal outdoor spore ranges in about 85% to 90% of jobs on the first pass. The remaining cases usually involve hidden growth we find with a boroscope and re-blast during the same visit.

Certifications and Reviews

Certifications

IICRC WRT (Water Damage Restoration Technician) by Institute of Inspection, Cleaning and Restoration Certification
IICRC AMRT (Applied Microbial Remediation Technician) by Institute of Inspection, Cleaning and Restoration Certification
ACAC CMI (Certified Mold Inspector) by American Council for Accredited Certification
ACAC CMR (Certified Mold Remediator) by American Council for Accredited Certification
EPA Lead-Safe Certified Firm by U.S. Environmental Protection Agency

Reviews

Google

They blasted our attic after a roof leak and the sheathing looks like new lumber. Containment was tight, the crew was on time, and the clearance report came back clean on the first try. Price matched the quote exactly.

Yelp

Crawl space was a mess and I was worried they would have to tear out the subfloor. They blasted the joists, installed a vapor barrier, and the smell was gone in two days. Property manager approved the report without questions.

BBB

Called on a Tuesday, inspected same day, blasted Thursday. No water mess, no chemical smell, and the wall went back together the following week. They handled the Xactimate estimate for our insurance and it was approved without a supplement.

Google

Found mold behind the bathroom tile and another company told us the whole wall had to come out. These guys boroscoped it, opened a small panel, and blasted the framing. Saved us thousands in rebuild cost and passed clearance on the first pass.

Related Mold Services in WILMINGTON

Mold Inspection Near Me

Before any blasting, we run a full inspection with moisture meter and thermal imaging camera to confirm where the mold is and how far it has spread. This is the step that tells you whether dry ice blasting is the right method or whether removal and rebuild makes more sense.

Mold Inspection Near Me

Mold Inspection

A standard mold inspection covers visible growth, moisture sources, and air quality readings. We pair it with dry ice blasting mold work so the scope is based on real data, not guesswork. Most inspections take 60 to 90 minutes and you get the report the same day.

Mold Inspection

Mold Testing

Lab-based mold testing identifies the species present, including toxic strains like Stachybotrys. We use it before blasting to confirm scope and after blasting to prove clearance. Results come back in 24 to 48 hours from an accredited lab.

Mold Testing

Mold Testing Near Me

If you need mold testing close to home in WILMINGTON, we schedule same-day or next-day visits across most neighborhoods. Samples go to an accredited lab and you get a written report you can share with your landlord, buyer, or insurance adjuster.

Mold Testing Near Me

Certified Mold Inspector

Our ACAC CMI and CMR certified inspectors write the scope that drives every dry ice blasting mold job. That certification matters when you need documentation for a real estate transaction or an insurance claim. The inspector who scopes the job is the same one who signs off on clearance.

Certified Mold Inspector

Black Mold Inspection

Black mold growth needs a different response than surface mildew, and dry ice blasting is one of the few methods that removes it from framing without spreading spores. We confirm the species with lab testing, then blast under full containment. You get before and after photos with the report.

Black Mold Inspection

Home Mold Inspection

A whole-home mold inspection checks the attic, crawl space, bathrooms, and HVAC system for hidden growth. We often find that the visible mold in one room traces back to a crawl space problem two floors down. Dry ice blasting then targets the actual source, not just the symptom.

Home Mold Inspection

Residential Mold Testing

Residential mold testing covers single-family homes, condos, and townhouses across WILMINGTON. We sample air and surface, then match the remediation method to what the lab finds. Dry ice blasting is our first choice on structural wood, and chemical treatment on porous finishes.

Residential Mold Testing

Commercial Mold Inspection

Commercial properties need documentation that satisfies tenants, insurers, and sometimes regulators. Our commercial mold inspection includes a full scope, timeline, and Xactimate estimate. Dry ice blasting lets us work after hours with minimal disruption to your operation.

Commercial Mold Inspection

Mold Remediation Company

As a dedicated mold remediation company, we handle inspection, testing, blasting, encapsulation, and clearance under one roof. That means no handoff between contractors and no finger-pointing if something is missed. One team owns the result from first call to final lab report.

Mold Remediation Company

Emergency Mold Testing Services

When a pipe bursts or a roof leaks overnight, emergency mold testing gets you answers fast. We dispatch 24/7 and can usually sample within hours of your call. If blasting is needed, we schedule it for the same or next business day.

Emergency Mold Testing Services

Same Day Mold Testing

Same day mold testing is available for WILMINGTON addresses when you call before noon. An inspector arrives with a moisture meter and air sampling equipment, and you get preliminary readings on site. Lab results follow within 24 to 48 hours.

Same Day Mold Testing

Basement Mold Inspection

Basements in older WILMINGTON homes often have block walls that hold moisture and grow mold in the mortar joints. Dry ice blasting cleans block and mortar without driving water into the wall. We follow with a vapor barrier and dehumidifier recommendation to keep it dry.

Basement Mold Inspection

Attic Mold Testing And Removal

Attic mold is one of our most common dry ice blasting mold calls. Roof sheathing and rafters take the blast well, and the open space makes containment straightforward. Most attic jobs finish in a single day, including antimicrobial treatment and encapsulation.

Attic Mold Testing And Removal

Air Quality And Mold Testing

Air quality and mold testing measures spore counts inside and outside your home so you know whether the indoor air is actually a problem. We use it as the baseline before blasting and as the clearance check afterward. The comparison is what proves the job worked.

Air Quality And Mold Testing

Mold Remediation Near Me

If you are searching for mold remediation near me in WILMINGTON, we cover every neighborhood from Downtown to North Brandywine. Response is same-day in most cases. Dry ice blasting is one of several methods we bring, and we pick the right one for your material and scope.

Mold Remediation Near Me

Crawl Space Mold Removal

Crawl space mold is the classic case for cryogenic blasting because the joists and subfloor are structural and worth saving. We blast, apply antimicrobial, then install a vapor barrier to stop moisture from wicking back up. Most crawl spaces are done in one long day.

Crawl Space Mold Removal

Bathroom Mold Removal Service

Bathroom mold often hides behind tile and inside the wall cavity from a slow supply-line drip. We use a boroscope to confirm growth before opening the wall, then blast the framing once it is exposed. Tile and fixtures go back on after clearance testing.

Bathroom Mold Removal Service

Toxic Mold Removal

Toxic mold removal requires full containment, negative air, and PPE because the spores themselves are the hazard. Dry ice blasting is ideal here because it does not aerosolize spores the way dry brushing does. We HEPA-vacuum in real time and verify with post remediation mold testing.

Toxic Mold Removal

Mold Abatement

Mold abatement is the full process of removing mold and restoring the affected area to a clean, dry condition. Dry ice blasting is the removal step, and encapsulation is the restoration step. We handle both under one scope so nothing falls between contractors.

Mold Abatement

Professional Mold Removal

Professional mold removal means containment, HEPA filtration, proper PPE, and documented clearance. We bring all four to every job, whether it is a 40 sq ft bathroom or a 3,000 sq ft commercial space. Dry ice blasting is one of the tools in that kit, not the whole service.

Professional Mold Removal

Mold Cleanup Near Me

Mold cleanup near me searches usually mean someone found visible growth and wants it gone fast. We can typically inspect within 24 hours and schedule cleanup within the same week. Dry ice blasting is often the fastest path because there is no dry-out time afterward.

Mold Cleanup Near Me

Water Damage Mold Remediation

Water damage mold remediation starts with finding and stopping the moisture source, then drying the structure, then removing the mold. Dry ice blasting fits the removal step perfectly because it adds no new moisture. We coordinate with your plumber or roofer on the source fix.

Water Damage Mold Remediation

Mold Spore Testing

Mold spore testing tells you what is actually in the air, not just what you can see on the wall. We sample before and after dry ice blasting so you have a documented before-and-after comparison. That report is what most insurance carriers and buyers want to see.

Mold Spore Testing

Post Remediation Mold Testing

Post remediation mold testing is the verification step that proves the job worked. We run it after every dry ice blasting mold project, with a minimum four-hour air scrub before sampling. If counts are still elevated, we re-clean at no charge.

Post Remediation Mold Testing

Mold Fogging Treatment

Mold fogging treatment uses a fine mist of antimicrobial solution to reach surfaces that hand wiping cannot. We often pair it with dry ice blasting on complex spaces like HVAC plenums and attic truss bays. The fogger reaches the nooks, the blasting handles the flat surfaces.

Mold Fogging Treatment

Affordable Mold Remediation

Affordable mold remediation does not mean skipping containment or clearance testing. It means scoping the job tightly so you only pay for the area that actually needs work. Dry ice blasting helps here because it saves material you would otherwise have to replace.

Affordable Mold Remediation

24 Hour Mold Removal

24 hour mold removal is for emergencies: burst pipes, sewage backups, storm intrusion. We dispatch around the clock and can usually have containment up within a few hours of your call. Dry ice blasting is scheduled as soon as the source is stopped and the area is safe.

24 Hour Mold Removal

Odor Removal Mold

Musty odors come from mold volatile compounds, not just visible growth. Removing the mold removes the odor, which is why dry ice blasting plus antimicrobial treatment usually eliminates the smell in one visit. If odor lingers, we check the HVAC system for contamination.

Odor Removal Mold

Get Dry Ice Blasting Mold in WILMINGTON, California Scheduled Today

Every job starts with a free inspection and a fixed written price. We are IICRC and ACAC certified, and we back every dry ice blasting mold project with clearance testing and a workmanship warranty. Call (833) 929-5837 now and we will get an inspector to your door.